RoverWare.US: New Products - Tools and Fixtures

Brake Pipe Bender (Bending Tool) - Automec/Oakes - for 3/16" steel/copper/copper-nickel

Sat, 13 Apr 2019 11:41:26 +0000

Brake Pipe Bender (Bending Tool) - Automec/Oakes - for 3/16" steel/copper/copper-nickel

This small, inexpensive tool aids bendin..

Price: $24.00

32MM Socket - LaserTools - BA 4895

Mon, 06 Jun 2016 17:13:17 +0000

32MM Socket - LaserTools - BA 4895

A high quality 1/2" socket. 32MM for hub nuts. Many sets don't have this size, or 'yi..

Price: $10.00

Bolt 3/8" UNF x 1-3/4" (stud, special bolt) for Axle Casing (4 per pack) - BR 2243 - 561196

Thu, 15 Oct 2015 09:38:24 +0000

3/8" UNF x 1-3/4" bolt (stud, special bolt) for axle casing

This bolt is sometimes needed in four positions when installing a later "thick flange" final drive assembly (differential, or third member) into an ..

Price: $8.00

Bearmach HawkEye Diagnostic Unit (Code Reader / Programmer / Tester)

Sun, 11 Oct 2015 09:08:43 +0000

A diagnostic tool that is truly portable and simple to use by the home or professional mechanic. Bearmach’s HawkEye is an essential tool for Land Rovers and it is the electronic equiv..

Price: $438.00

Tap - 1/4" BSPF (19tpi) - Differential Casing (for air locker)

Wed, 10 Jun 2015 15:35:57 +0000

A high quality 1/4" BSPF (19tpi) tap for tapping the differential housing for the air fitting needed when installing an air locker. This tap requires a 7/16" hole, which can be made using our

A high quality 7/16" drill bit for drilling the differential housing, prior to tapping a 1/4" BSPF (19 tpi) thread, for the air fitting needed when installing an air locker. This dril has three ground flats on the shank to prevent spinning in the drill chu..

Price: $13.00

Drive Shaft (Prop Shaft) Removal Tool BA3138 9/16" Bolt Size 1/2" Drive Socket End

Mon, 30 Mar 2015 20:32:31 +0000

Drive Shaft (Prop Shaft) Removal Tool. BA3138

For removing 9/16" drive shaft bolts. Bell end allows clearance around UJs. 1/2" Drive Socket End.

Makes removing a drive shaft (prop shaft) much easier than an open ended or ring wrench. Normally reduces swea..

Price: $26.00

Hub Nut Box Wrench or Box Spanner (or socket) - 52mm (2 1/16" approx.) - LRT54002

Mon, 30 Mar 2015 19:08:19 +0000

Hub Nut Box Wrench or Box Spanner - 52mm (2 1/16" approx.)

Equivalent to LRT54002 or BA 3039

A precision fabricated adapter manufactured based on (but not identical to) the drawing in many of the Land Rover and Range Rover manuals. Referred to as "RR2195E" or "LRT-99-010" (sometimes LRT-99-011) in the variou..

Price: $150.00