Wheel Bearing Kit - RWB102

Description:

Wheel bearing kit for most Land Rover solid axle vehicles.

Contains:

2 x wheel bearing RTC3429 (/STC4382)

1 x axle oil seal FTC5268 (small seal)

1 x hub oil seal FTC2783 (large seal)

2 x joint gasket 571752

2 x lock washer FTC3179

Note: only one of each of the joint washer and lock washer is required, however we provide two of each to allow you to re-grease and/or re-adjust your bearings at a later stage. It is strongly advised that the bearing slack/torque are re-checked after a few hundred miles of driving.

Fits: D1 (all ABS models), D90 1994-1997, most RRC fitted with ABS axles.

Note: in some cases the RRC and Defender locking hardware may differ. Old hardware can be reused if serviceable.

Specification:

Bearmach branded seals and bearings (usually NTN) are provided in this kit. All paper gaskets are reproduction (not OEM)

A similar kit, using OEM bearings and seals, can be found here Wheel Bearing Kit - RWB102OE