Rear Long Travel Spring Catcher - BA 7545 - Wildbear

These rear spring relocators are a lighter version than the Gwyn Lewis version that we also sell - Rear Spring Catchers/Relocators - Heavy Duty (6mm) - Gwyn Lewis 4x4.

These are finished in a dark grey/silver painted finish.

These relocators guide the rear spring back in as normal with minimal noise, but on extreme drop out they catch the last coil of the spring to stop it from coming past the relocator.  The coil spring must be positioned properly to allow the hook to catch on the last full coil of the spring, not where the spring ends but where it doubles up (see picture below).

Jacking the vehicle up is quite simple, by first placing a round bar or a wheel brace through the spring and relocator to minimise axle movement (to hold the spring up) when using a hi lift jack.

Fits:

RRC / D1 / Defender 90